47 research outputs found

    Personalizable Service Discovery in Pervasive Systems

    Get PDF
    Today, telecom providers are facing changing challenges. To stay ahead in the competition and provide market leading offerings, carriers need to enable a global ecosystem of third party independent application developers to deliver converged services. This is the aim of leveraging a open standardsbased service delivery platform. To identify and to cope with those challenges is the main target of the EU funded project IST DAIDALOS II. And a central point to satisfy the changing user needs is the provision of a well working, user friendly and personalized service discovery. This paper describes our work in the project on a middleware in a framework for pervasive service usage. We have designed an architecture for it, that enables full transparency to the user, grants high compatibility and extendability by a modular and pluggable conception and allows for interoperability with most known service discovery protocols. Our Multi-Protocol Service Discovery and the Four Phases Service Filtering concept enabling personalization should allow for the best possible results in service discovery

    Optimizacija ekstrakcije makroelemenata iz matičnjaka metodom odzivne površine

    Get PDF
    The effects of liquid-solid ratio (15-30 ml g-1, solvent volume per g of dry material), temperature (40-100oC) and time extraction (20-80 min) such as their interaction on extractability of macroelements of lemon balm were studied. The optimal conditions for the macroelements extraction were determined by response surface methodology. The 23 design showed that polynomial regression models were in good agreement with the experimental results with the linear correlation coefficients of 0.9997, 0.9992, 0.9985 and 0.9989 for K, Ca, Mg and P, respectively.Proučavani su efekati solvomodula (15-30 ml g-1, zapremina rastvarača po g suvog materijala), temperature (40-100oC) i vremena ekstrakcije (20-80 min) kao i njihovih interakcija na ekstrakciju makroelemenata iz matičnjaka. Optimalni uslovi za ekstrakciju makroelemenata određeni su metodom odzivne površine. Trofaktorijalni dizajn na dva nivoa (23) pokazao je dobro slaganje polinomnog regresionog modela sa eksperimentalnim rezultatima, pri čemu su linerni korelacioni koeficijenti iznosili 0,9997, 0,9992, 0,9985 i 0,9989 za K, Ca, Mg i P, respektivno

    Mineral Profile of Some Dried Fruits

    Get PDF
    The aim of this work was to determine the content of 16 elements in the seven samples of dried fruits: plums (Prunus domestica), figs (Ficus carica), apricots (Prunus armeniaca), white and black raisins (Vitis vinifera), dates (Phoenix dactylifera) and cranberries (Vaccinium oxycoccus), which are available in local markets. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used after wet digestion method. Potassium is the most common macroelement while boron and zinc are the most common microelements. As, Cd and Hg were not detected while the content of Pb is below the MAC. The obtained results were statistically analyzed and compared with the literature values

    THE DYEING PROCESS OF KNITTED FABRICS AT DIFFERENT TEMPERATURES USING ULTRASOUND

    Get PDF
    The dyeing of knitted fabrics made from 100 % cellulose using on-line procedure vinyl sulfonic reactive dye, with or without ultrasound energy, is carried out in this paper. The impact of temperature has been observed. The dye exhaustion is monitored using the method of absorption spectrophotometry, and the quality control of the coloration is monitored using color measurements. The acting of ultrasound on coloration consistency, as well as on some mechanical characteristics has also been examined. All examples of the ultrasound dyeing process show greater dye exhaustion in comparison to the conventional procedure. In addition, all the samples, which have been dyed with the ultrasound energy at 40°C, are significantly darker and have deeper color in comparison with the referent sample. The temperature has a great influence on kinetic energy of the dye molecules, and therefore on the diffusion processes in the dyeing system. The exhaustion chart indicates that when the temperature is lower the exhaustion degree drops. However, all the samples dyed with the ultrasound energy have bigger exhaustion. Besides that, ultrasound energy contributes to warming up the processing environment, so the additional warm up with the electricity is unnecessary, unlike the conventional way of dyeing. Since the reactive dyes chemically connect themselves with the cellulose substrate and in that way form covalent connection, the dyed fabrics have good washing consistency. Analysis results indicate that the consistencies are identical regardless the applied dyeing procedure. In other words, the dyeing method using the ultrasound energy produces the dyed fabric of the same quality. After analyzing the results of breaking force and elongation at break of knitted fabrics, it is noticeable that there is no degradation of previously mentioned knitted fabrics features (horizontally and vertically) during the ultrasound wave’s activity

    DYEING OF KNITTED MICRO-VISCOSE IN THE PRESENCE OF ULTRASOUND WITH DIFFERENT FREQUENCIES

    Get PDF
    In dyeing process, the object is to transport or diffuse dyes and chemicals into the fibre. Various novel processes, including ultrasound, are being introduced and studied as more environmentally friendly alternatives. Encouraging results have been reported for the use of ultrasound energy in dyeing processes of micro-viscose. The recent studies revealed major ultrasound applications advances: savings of processing time, energy, chemicals, as well as environmental protection. Influence of various ultrasound frequencies (40, 200 and 400 kHz) on dyeing of micro-viscose knitted fabrics, by a reactive dye has been reported in this work. A method of reflection spectrophotometry has been employed to record reemission curves of the colored compounds. A software packet has been employed to calculate CIELab colored coordinates. Then, a comparison has been made with samples colored by conventional procedure according to CIELab76 and CMC (2:1) criteria. The use ultrasound in textile dyeing processing offers many potential advantages. The results prove better dye exhaustion by ultrasound and consequently the better fixing. The exhaustion for the bifunctional dye (containing two vinylsulphone groups) reaches 71.75 % without ultrasound, and 83.69 % with 400 kHz ultrasound. The 40 kHz, 150 W ultrasound causes a cavitation of higher intensity, compared to 200 and 400 kHz ultrasounds. In this particular case, destruction of cavitation bubbles is very intensive. That is why a large amount of cavitation energy is being transformed into a heat, yielding the additional bath heating. The ultrasounds with higher frequencies (200 and 400 kHz) cannot use such a strong power. The applied powering this case reaches 0.6 W. The cavitation bubbles are now smaller the cavitation disintegration is not so strong, and the energy loss is much smaller, i.e. a smaller amount of energy has been transformed into a heat. An ultrasound of an equal power, but of higher frequency contributes to the somewhat higher exhaustion and fixing. The ultrasound dyeing produces much obscured colours, compared the standard. The differences are evident and not negligible. The comparison of the samples treated ultrasound of different frequencies during dyeing revealed the higher coulours intensities with the increase of ultrasound frequencies of the equal power (200 and 400 kHz). However, the increase is not so expressed

    Short-term dexamethasone plus acetylsalicylic acid treatment during in vitro fertilization procedure

    Get PDF
    Objectives: Embryo implantation represents the major limiting step during in vitro fertilization (IVF) procedure. Immu- nological and coagulation abnormalities were shown to have a substantial part in multifactorial etiology of IVF failure. We aimed to investigate the effect of short-term low-dose dexamethasone plus acetylsalicylic acid (ASA) treatment, starting at the time of embryo transfer, on the implantation and clinical pregnancy rates in general IVF population.  Material and methods: Out of 233 consecutive patients undergoing fresh IVF/intracytoplasmic sperm injection (ICSI) cycles 64 received an adjuvant treatment consisting of dexamethasone (0.5 mg/day) plus ASA (100 mg/day) (DA group), starting on the day of embryo transfer. Patients not receiving these medications comprised a control group.  Results: Significantly more patients in DA group had positive ß-hCG values than controls (59.38% vs. 37.67%, p = 0.004) (OR = 2.42, 95% CI: 1.33–4.41). Implantation rate was 26.53% in DA group and 15.92% in controls (p = 0.0294). Clinical preg- nancy rate per started cycle was higher in DA group (43.59%) than controls (28.92%), but the difference was not significant (p = 0.0879; OR = 1.99, 95% CI: 0.89–4.41).  Conclusions: Our study shows a potential benefit of dexamethasone plus ASA adjuvant treatment in females undergoing IVF/ICSI procedure. As these results show improvement of IVF outcome, a greater number of patients undergoing this type and regime of adjuvant treatment should be investigated.

    Determination of Total and Individual Anthocyanins in Raspberries Grown in South Serbia

    Get PDF
    Raspberry fruits of four cultivars (Willamette, Meeker, Polana and Malling Promise) grown in South Serbia were analyzed for total and individual anthocyanins. High-performance liquid chromatography with diode array detection (HPLC-DAD) was used to study individual anthocyanins. The major anthocyanin was cyanidin-3-sophoroside, followed by cyanidin-3-glucosylrutinoside, cyanidin-3-glucoside, pelargonidin-3-sophoroside and cyanidin-3-rutinoside. The monomeric anthocyanin contents of the acidified 80% methanol extracts were determined using the pH-differential method. The highest total and individual anthocyanins contain raspberries cv. Willamette, followed by cvs. Meeker, Polana and Malling Promise

    Enabling IoT ecosystems through platform interoperability

    Get PDF
    Today, the Internet of Things (IoT) comprises vertically oriented platforms for things. Developers who want to use them need to negotiate access individually and adapt to the platform-specific API and information models. Having to perform these actions for each platform often outweighs the possible gains from adapting applications to multiple platforms. This fragmentation of the IoT and the missing interoperability result in high entry barriers for developers and prevent the emergence of broadly accepted IoT ecosystems. The BIG IoT (Bridging the Interoperability Gap of the IoT) project aims to ignite an IoT ecosystem as part of the European Platforms Initiative. As part of the project, researchers have devised an IoT ecosystem architecture. It employs five interoperability patterns that enable cross-platform interoperability and can help establish successful IoT ecosystems.Peer ReviewedPostprint (author's final draft

    Compliance and approach to voluntary HIV testing in a high-risk region for HIV transmission in Europe

    Get PDF
    Background: The Kosovo province is being considered as a high-risk region for the spread of HIV. Objective: To estimate the prevalence and factors associated with HIV testing in a sample of university students from the Serbian northern Kosovo province. Material and Methods: A questionnaire examining socio-demographic characteristics, HIV–related knowledge, attitudes towards people living with HIV (PLHIV) and HIV testing was used in data collection. A total of 1,017 students from the University of Priština temporarily seated in Kosovska Mitrovica completed the questionnaire. Results: Only 5.4% of students have previously been tested for HIV, even though the majority (70.9%) had a positive approach to HIV testing. Factors associated with having been tested for HIV were being male and younger, having interest in HIV testing and having previous contact with PLHIV. Being more knowledgeable about HIV and having stronger positive attitude towards PLHIV, being older, receiving information about HIV through friends and special educational programs, using condom at last sexual intercourse, having positive opinion on gays/lesbians and previous contact with PLHIV were associated with positive approach to HIV testing. Conclusion: Having a positive approach to HIV testing does not suggest that students would take the HIV test. However, students who have low HIV-related knowledge, negative approach or lack of interest in HIV testing (believing that there is no need to take it) would likely never take the HIV test. Increasing HIV-related knowledge, acceptance of PLHIV and access to testing facilities should be public health priorities to raise HIV testing rates. Keywords: HIV testing; attitude; knowledge; University students
    corecore